The market demand for children's furniture continues to rise, and children's furniture has higher standards in materials and design. Children's furniture, which has always been made of sheet metal, is also constantly introducing a combination of wood and wood and solid wood. The original children's furniture is biased towards entertainment and fancy, and now it has taken a pristine route. Many parents find that today's children's furniture is more and more practical, and more and more humane. â– Picking a class Choose the right furniture for five details Choose a table and chair according to the child's height This can avoid children's bone bending, myopia and other phenomena caused by the height of the table and chair, it is recommended to bring children to try to buy children's furniture, in order to achieve the best results. The drawer should have a damper and it is not easy to derail. The wardrobe door should have a hydraulic buffer function, which will not cause the child to be injured when pulling the drawer or the door. Do not buy furniture with large pieces of glass or mirrors. Children have "destructive power", and if the glass breaks, it is easy to hurt the child. Color matching is very important Green can inspire children's interest in nature. Red will inspire children's enthusiasm and yearning for a better life. Blue is a mysterious and quiet color. Parents can choose the color according to their child's personality. Lively and active children can choose blue or white; while introverted and weak children can choose warm colors such as red and bright yellow. Excessively deep furniture, or old, lacking color furniture is best not used. It is advisable to choose a children's bed with a wooden bed and a hard spring bed. For children, it is generally not advisable to choose a mattress that is too soft and soft. The bed is too soft and can easily cause skeletal deformities in children. At the same time, it is recommended not to use a 50mm to 100mm thick sponge pad, which will cause children's sweat and urine to accumulate in the sponge pad and cause the child to eat lice. The gap between each column of the bed rail should be controlled at 7 cm. The gap between the bed rails is too large, and it is easy to get stuck in the head; the gap between the bed rails is too small, it is easy to get stuck in the hands and feet, causing unnecessary injury. The 7cm spacing is in compliance with international safety tests. International safety standards. Plastic veneer and melamine board furniture are more wear-resistant Children love to paint love is a natural, plastic veneer and melamine veneer furniture is not easy to be scratched by children when playing, and solid wood children's furniture, mainly depends on whether the surface of the paint is wear-resistant, polyester paint and water-based The paint film made of lacquer is hard and wear-resistant and environmentally friendly. View test report In terms of environmental protection, the state does not set a separate standard for children's furniture. However, if the hazardous substance content of the furniture is up to standard, there will be a test report and it will be indicated in the instructions for use. Therefore, when parents choose children's furniture, it is best to buy branded products, and according to the characteristics of the furniture, check the business test report and furniture instructions to understand the performance of the furniture. After choosing furniture, it is best to ventilate and maintain a good ventilation. â– Design class Ingenious design makes furniture more practical Round or curved corners are safer This is the basic concept of children's furniture design. Children are very active, and it is inevitable that they will be touched. In order to make children's rooms safer, the corners of desks, wardrobes and beds are mostly round or curved. The lines of the tables and chairs are also smoother and smoother to reduce the danger. Use space to accommodate Parents hope that the children's room can be as spacious and clear as possible, and all kinds of trivial things can be well accommodated to provide children with safer and more convenient playing space. Some of the ladders that get on and off the bed are designed as small drawers one by one, which not only makes effective use of the space, but also plays a role in facilitating storage. At the same time, it also reduces the risk of the child's footstepping, which is ingenious. There is also a desk with bookshelves designed to be in the form of wheels. The back of the desk is a storage cabinet and a wardrobe. The desk serves as a cabinet door. To take things inside the cabinet, just move the desk. Various puzzles add childlike fun Children's furniture is not like adult furniture, and various geometric figures are used to increase childlikeness. For example, the wardrobe is designed like a European castle, and the top of the cabinet is a triangle. The tables and chairs are designed according to the pattern of twelve constellations, allowing children to choose their own constellation tables and chairs. At the top of the bed, a vaulted tent is set up to allow the child to sleep as if entering a safe tunnel. Metal Trivet,Steel Trivet,Stainless Steel Trivets,Metal Trivet Stand Jiangmen Sunbond Houseware Manufacturing CO.,LTD , https://www.sunbondhw.com