Fully enter the packaging industry in the environmental protection industry to win new opportunities

<

China's packaging industry started from the early 1980s. After more than 20 years of development, it has gradually formed a relatively complete system and has a considerable scale. However, the rapid development of the industry has also caused many environmental problems. During the seminar on solid waste technologies in East China held in Nanchang, experts pointed out that a full-scale advancement to the environmental protection industry will provide opportunities for the packaging industry to win the second major development. It is hoped that the company will achieve a double ideal return as soon as possible.
At present, the annual output of packaging waste in China is about 16 million tons, and at the same time it is still growing at a rate of more than 10% each year. The resulting environmental problems are mainly manifested in many aspects such as the consumption of natural resources, the disposal of wastes, the increase of waste management pressure, and the environmental impact of waste.
Relevant experts pointed out that at present, packaging waste has been increasing, and recycling technology has reached an initial maturity. Under the condition that solid waste is treated in the direction of reduction, harmlessness, and recycling, it is not only feasible to invest in the recycling of packaging waste. And it will also promote the development of the packaging industry. On the one hand, this is in line with the country's sustainable development strategy. The strengthening of environmental protection has solved the worries of the development of the packaging industry and opened up new economic growth points. On the other hand, advancing to the environmental protection industry can develop inexpensive packaging for the packaging industry. Sources of raw materials, lower original production costs, with dual economic and ecological benefits.
The gap in recycling of packaging materials is very large. With the increase in the amount of packaging waste, the cost of waste disposal has been rising, and increasing the recycling of packaging waste is a general trend. However, in the rapid development of packaging production, China still has a large gap with developed countries in terms of waste management, disposal and recycling.
According to statistics, the reuse rate of paper, iron, aluminum and glass containers in Switzerland averaged over 86%; the German tinplate recovery rate was 50%, the corrugated paper recovery rate was 95%, and the comprehensive recovery rate of waste newspapers was 78%. In contrast, the environmental pollution caused by the production, circulation, and consumption of packaging products in China has not been fully and adequately valued. Experts cautioned that the current investment in packaging recycling waste recycling is at the right time.
Recycling of packaging materials is a vast market First, recycling of packaging materials has significant economic and ecological benefits. According to experts, although there are many types of packaging waste, the packaging materials can be basically divided into four categories: paper products, plastic products, glass products and metal products. Packaging waste is mostly renewable resources. Calculated according to the current recovery level: The country recycles 140,000 tons of cartons a year, which can save 80,000 tons of coal with the same amount of paper, electricity, 49 million degrees, 23.8 tons of wood pulp and straw, and 11,000 tons of caustic soda; 1 billion, which can save 49,000 tons of coal, 38.5 million tons of electricity, 490,000 tons of quartz, and 15,700 tons of soda ash, and 40 million tons of iron cans. Steel 48,000 tons; recycling packaging 100 million meters a year, can save 15,000 tons of cotton; recycling all kinds of sacks 3000, can save 22.5 tons of raw hemp, the total value of the above several up to several hundred million yuan.
Second, the continuous growth of packaging waste production provides sufficient production resources for recycling. Judging from the statistics of the total output of the national packaging industry, currently there are approximately 8.35 million tons of paper packaging products, 2.44 million tons of plastic packaging products, 4.44 million tons of glass packaging products, and 1.61 million tons of metal packaging products. At the same time, these products also grow at a rate of 12.5%-30% per year. The research data shows that 1 ton of waste paper can regenerate 0.8 ton of new paper or 0.83 ton of cardboard; 1 ton of waste plastic can regenerate 0.75 ton of diesel or 0.6 ton of unleaded gasoline. From this we can see that there is no need to worry about the "raw material" problem of recycling.
Thirdly, the technology for the treatment of packaging waste has become increasingly mature. The treated packaging waste has a wide range of uses and its market prospects are promising. For example, degradable plastics composting and soilless cultivation matrix technology are the supporting technologies for degradable plastic lunch boxes and other products. After discarded snack boxes are recycled, they can be mixed with soil or other substrates by smashing and detoxifying treatment, and used for soilless or semi-aerial cultivation. Waste plastics oiling technology uses high-performance catalysts to "depolymerize" high-density polyethylene or polypropylene plastics at certain pressures and temperatures, and reconnects hydrocarbons in plastic particles into long-chain hydrocarbon compounds, ie, liquids. Oil; Can produce diesel and gasoline that meet the national standards, oil production rate of more than 75%; If you install the necessary equipment, you can also recycle liquefied gas and carbon black. By changing the catalyst, it can also produce chemical products such as toluene, xylene, and pure benzene. In addition, waste plastics (including PE, PP, PVC, PS) and filling mixtures (including a variety of urban and rural wastes such as activated carbon waste, crushed animal and plant waste, weathered coal, humic acid and other powders) together form a fertilizer capsule. The cost of membranes is only about 300 yuan/ton more than ordinary compound fertilizers. This is an environmental protection project that changes "white pollution" to "green fertilizer" and can absorb a large amount of packaging waste.

Peripheral Devices and Consumables

Based on the low labor cost and reasonable stainless steel cost, Helper help to offer clients internal transport devices with best price. These machines and device include standard material truck, smoking trolley, lifter, conveyer belts, spiral feeding machine, hydraulic lifter etc. The internal transport device is used in filling and forming workshop, tumbling and seasoning workshop, smoking and cooking room etc.

internal transport device new

Helper has a professional team to design and produce sausage clips. They have rich experience and understand all the key points for produce good quality clips. From the raw material purchasing to mould designing, from the QC in production to post-treatment, they pay attention to all these details that lead to the good quality of Helper`s clip series. Our clips products include U shape clips, Great wall shape clips, and aluminum wire (for aluminum wire clipper).

consumables overview

U Shape Sausage Clip,Clips On Strip,Bag Packaging Clips,Screw Material Conveyor

Helper Machinery Group Co., Ltd. , https://www.helpermeatmachine.com