Nowadays, automation products are becoming more and more popular. In recent years, many manufacturers of automation products have begun to emerge in China. Many of them are manufacturers of "automatic locking screw machines". Many manufacturers say that they originate from foreign technology or introduce foreign technology, but it is plain. , In fact, imitating foreign technology. The "automatic screw machine" has no major shortcomings in terms of design principles, but many design manufacturers have overlooked one problem when designing, that is, the quality of the screws, big heads, partial heads, burrs (burrs), etc. They are the killers of automatic lock screw machines. They are fatal to "automatic lock screw machines". At present, few domestic manufacturers dare to say that they do not have big heads, partial heads, and sharp edges (burrs) in each batch of screws. Therefore, the domestic "automatic lock screw machine" is very unstable at work. "Handheld automatic "Lock screw machine" is better, there are manual operations, problems can be dealt with in time, but fully automatic will not work, no one has found any problems, seemingly high efficiency, if you count the maintenance time, it might be better "Hand-held automatic locking screw machine"! Specifically, the shortcomings of "automatic locking screw machine" are mainly card machine, floating teeth (not tight), flower head, these are caused by poor quality of the screw or Most manufacturers of screw machine can't solve the problem caused by the manufacturer changing the design size to solve the bad screw quality. It is a fatal disease! ! ! In addition, the problems of the machine itself are caused by the materials, processes and brands used by electronic parts, and these are not big problems, because powerful manufacturers can solve this problem. Here we do not discuss. I don't need to explain the card machine, everyone must understand that the so-called floating teeth and flower heads are caused by two reasons. The first is its own design and structural problems, and the second is that the screw machine manufacturers have enlarged all the screw machine channels to solve the above-mentioned special-shaped screws, including the electric nose mouth. ! Automation has been popular in foreign countries for many years. They can be said to be very mature in technology. They are very clear about the problems that easily occur in the "automatic screw machine" in the payment, so it is easy to treat the disease. Screening of the screws of Mao Feng (Mao) will not cause jamming, floating teeth, and flower heads due to the quality of the screws! It can automatically screen and refill, without floating teeth and flower heads!

Tattoo Care

Three to four hours after the completion of the tattoo, clean the tattoo with warm water, use a bath, then dry with a sanitary towel, keep dry, apply the care cream, after cleaning every day, apply once.