[ Chinese wardrobe net ] Xiaobian to talk about the wardrobe board which is a good question, the wardrobe is essential for every household, is a collection of furniture and decoration, the market is full of furniture brands and all kinds of furniture sheet What kind of style is better? Below, Xiaobian takes you to understand what kind of wardrobe wood is good. Which kind of wardrobe is good? Which is good for the wardrobe board? The fir integrated board nowadays most owners use the fir integrated board (also called the fir finger joint board) to make the cabinet, while the back board uses the finger-finished nine-centre board. This combination is not environmentally friendly. Why is the decoration company so matched? First, the nine PCT board does not crack, and the strength of the backboard is sufficient. Second, the cost of the PCT board is low. Third, the environmental protection is not related to the company, and is not considered by them. Fourth, the owner does not know the performance and profit of the board. Relationship, do not understand this line, so no objection. The use of fir composite integrated board is to cross the fir boards vertically and horizontally without deformation or cracking. This kind of board is specially used as the back board, and the price is a little more expensive than the fir integrated board. The whole wardrobe uses a kind of board of fir integrated board. What should I do if I want to crack? The measures are: 6 pieces of 10 cm wide wood slats on the back, brushed with white glue, and fixed with dry wall nails. Then the entire cabinet is fixed to the wall, which reduces the cracking of the backboard. Fir-integrated panels make wardrobes have advantages and disadvantages. Lee, because it is bare board, formaldehyde content is less, relatively environmentally friendly; disadvantages, because the quality of Chinese fir is tender, frugal, rough, visually poor, easy to crack, deformation. If you use the fir-wood board to make the wardrobe, it is better than the fir finger joint board to make the wardrobe stable. Which kind of wood is good? The solid wood particle board is a new type of high-grade environmentally friendly substrate. It is a board produced by the particle board process. The density of solid wood particle board is relatively high, and the wood fiber particles in the board are large, which preserves the essence of natural wood. The content of solid wood particle board in the use of adhesive is generally less than 5%, and the environmental protection is better. In addition, its processing properties are as good as particleboard. The particle board is insulated and absorbs sound. Because the preparation method is easy, the quality is very different, it is difficult to distinguish, the bending resistance and tensile resistance are poor, and the density is loose and easy to loose. Did you understand the system knowledge about the two kinds of wardrobe plates of fir integrated board and solid wood particle board? There are a lot of furniture brands and patterns of furniture in the market. When you buy, you must pay attention to it. I hope the content in the above article will help you. GuangZhou Ailian Cosmetics Co Ltd , https://www.ailianobo.com