Foshan Gruwill Hardware Products Co., Ltd. , https://www.zsgruwill.com
Shanghai Xinzhuang Instrument Intelligent Light Incubator is the most energy efficient
Shanghai Xinzhuang adheres to the principle of "survive through quality, develop through technology, benefit from management, and build credibility through service." We take great care in every piece of equipment, each project, and every detail, strictly fulfilling our commitments and maintaining high standards of reliability. Our excellent quality and dedicated service have earned the trust of a wide range of users. With our professional expertise and strong technical team, Shanghai Xinzhuang is here to support you every step of the way.
**Common Faults and Maintenance of Intelligent Light Incubators:**
1. Ensure that the incubator housing is properly grounded to prevent electrical hazards.
2. Place the incubator in a cool, dry, and well-ventilated area, away from direct heat sources and sunlight. Make sure it is placed on a stable surface to avoid noise or vibration.
3. For effective heat dissipation, maintain a minimum distance of 100mm between the condenser and the wall. Leave at least 50mm of space on both sides of the unit and 300mm above the top.
4. When transporting, repairing, or maintaining the incubator, avoid dropping or shaking it. The maximum angle of inclination should not exceed 45 degrees.
5. If the instrument suddenly stops working, check if the fuse is blown and verify the power supply connection.
6. When operating in refrigeration mode, avoid having a temperature difference of more than 25°C between the inside of the incubator and the surrounding environment.
**Common Issues with Intelligent Light Incubators:**
1. The compressor may not be cooling effectively, leading to uneven temperatures inside the incubator or frozen air outlets.
2. In balance mode, the compressor runs continuously, which improves cooling performance and helps extend its lifespan.
3. When operating in single-system mode, the temperature may drop to a certain level, but opening and closing the door can cause significant fluctuations, affecting the compressor’s efficiency.
4. Frequent startups can reduce the lifespan of the equipment.
5. Temperature inconsistency may occur due to overcrowding or malfunctioning internal fans.
6. Prolonged use of the light can cause the bulb to overheat, resulting in uneven temperature distribution.
Each refrigerated unit has a defrost cycle during which the compressor does not operate. During this time, the heating element melts the ice on the condenser. The melted water may collect near the air outlet and eventually form ice, potentially causing damage or malfunctions. Regular maintenance and proper usage are essential to ensure optimal performance and longevity of your intelligent light incubator.