Use of stainless steel electric distilled water device 1. Use of stainless steel electric distilled water device This product uses electricity to heat tap water to prepare pure water by distillation, which can be used by medical and health, pharmaceutical and laboratory departments. This product is easy to use and flexible, simple to operate, and more unique is the use of high-quality Icr18Ni9Ti stainless steel material, which is specially processed and carefully processed. This not only fully guarantees the quality of the distilled water, but also greatly improves the service life. specification HS · Z11 · 5 HS · Z11 · 10 HS · Z11 · 20 Water output 5 liters per hour 10 liters per hour 20 liters per hour Power consumption 4.5kw 7.5kw 15 kW Input power 220 volts 380 volts 380 volts Dimensions 30 × 21 × 58 (cm) 30 × 25 × 72 (cm) 30 × 28 × 72 (cm) Package size 30 × 27 × 65 36 × 29 × 78 39 × 32 × 78 Net weight / gross weight Kg 5 / 6kg 6 / 7.5kg 10 / 12kg http: // 3D Mink Eyelashes,Natural Fake Lashes,Eyelashes Extensions,Camellia Eyelash Extensions Shijiazhuang HuangJia Trading Co., Ltd , https://www.hj-cosmetic.com
2. Structural Overview of Stainless Steel Electric Distilled Water Device This product is mainly composed of three parts: stainless steel evaporator, condenser and electric device.
(1) The components of the steam cooker are made of Icr18Ni9Ti high-quality stainless steel sheet, which is processed by hydraulic and extended argon arc welding. The water in the pot exceeds the limit water level and can automatically overflow, and the pot body and the pot cover have airtight devices. There is a water-retaining cap, which can effectively prevent the steam from entraining water droplets and affecting the quality of distilled water. The water jelly in the pot can be washed with acid and alkali liquid, which is convenient and thorough to remove.
(2) Condenser This part is made of Icr18Ni9Ti thin plate and thin tube. It adopts coil coil cooling structure, which has high heat exchange efficiency, and is easy to disassemble, which is convenient for washing the internal water masonry.
(3) Heating part This part is composed of immersion type electric heating tube. The electric heating tube is T4 copper sheath, which is durable and installed on the bottom of the inside of the evaporation pot. Be careful not to cut off water when using.
Third, the use of stainless steel electric distilled water device
1. First close the drain valve (8)
2. Open the water source valve (1), so that the tap water enters the cooler (3) from the inlet control valve (4), then flows into the funnel from the return pipe (2), and then is poured into the evaporation pot (6). Until the water level rises to the center of the glass water level gauge (5), when the water flows from the overflow pipe (7) and the water level stops rising, the water source valve (1) may be temporarily closed.
3. Turn on the power and wait for the water level in the pot to boil and start steaming, then open the water valve (1), but it should be noted that the water flow should not be too large or too small, and adjusted to the cooling water temperature of about 70 ℃, the most effective good. (The consumption of cooling water should not exceed 8.5 times the output of distilled water)
4. The distilled water outlet hose should not be too long, and do not insert into the distilled water container. The hose should be cleaned and rinsed with distilled water before use, and it should be kept unblocked to prevent choking steam to cause water leakage and overflow.
4. Precautions and maintenance of stainless steel electric distilled water device
1. Wash the inside once every day after use, and drain the stored water, replace with fresh water, so as not to reduce the water quality of the produced water masonry and affect the use effect.
2. Impurities in the water source will be left behind after evaporation, especially when the tap water is of poor quality and has not been treated. After evaporation, there will be precipitates condensed in the pot wall, the surface of the electric heating tube, and the inner wall of the condenser shell. The backwater pipes and other places on the outer wall of the condenser accumulate over time, which not only hinders the smooth flow of the water channel, but also affects the effect of the condenser pipe and even reduces the water production; for the electric heating pipe, it will also cause its heat to accumulate and shorten its service life . Therefore, the water purifiers above should be removed frequently. The cleaning method can be to use a brush to scrub a layer of dirt on the surface, and then use a weak acid or weak alkaline solution for cleaning, depending on the combination of dirt. When washing, please be careful not to apply excessive force to damage the parts.
3. The heating element of the distilled water device is an immersion electric heating tube. Its structure is based on nickel-chromium alloy as the main body of heat generation, buried in the center of the red copper tube, and surrounded by magnesium oxide as insulation. Therefore, once the water is cut off, the heat generated cannot be absorbed by the glass of water, which will cause the copper tube sheath to burst and burn, so it must be immersed in water.
4. The distilled water device must be operated by a special person, and it must be clearly explained when replacing the new operator.
5. Electrical parts should be checked regularly.
6. When the user replaces the electric heating tube by himself in the event of maintenance, the thermal ring at the joint must be intact to ensure that there is no water leakage, otherwise it will cause the insulation of the closed part of the electric heating tube to break down when energized due to water droplets. Tighten the nut at the continuous position of each thread to avoid sparks after being energized and burn the head of the heating tube.
7. The newly purchased distilled water device should be cleaned first, and after more than two hours of power-on evaporation, use internal cleaning. Then it will be officially used to ensure that the water quality meets the requirements. (Cleaning can be done by 2)
5. Product specifications and technical indicators of stainless steel electric distilled water device