Scientific management of stepper wardrobe for easy design and care

<

[ Chinese wardrobe network ] Whether it is a walk-in closet or a whole wardrobe , their position in the home can generally be selected according to their own living habits. Think about the time period in which you will use the closet , after the shower, or before you go out in the morning, when ironing clothes? Ideally, there is a compromise between the cloakroom and the bedroom, bathroom, laundry and entrance.

Four preparations are completed ahead of schedule

Stepper wardrobe

Selected location

Whether it's a walk-in closet or an overall wardrobe, their location at home can generally be chosen according to their own lifestyle. Think about the time period in which you will use the closet, after the shower, or before you go out in the morning to iron the clothes. Ideally, there is a compromise between the cloakroom and the bedroom, bathroom, laundry and entrance.

Five ways to make the most of the wardrobe

Neat suspension

Scientific management of stepper wardrobes for easy design and care

Types of items: long and short coats, suits, and fabrics that are easy to fold, such as silk shirts, evening dresses, wool or linen clothes.

Tools: hooks, clothes rails, pants hanging, hangers

Wardrobe design

Hanging the clothes not only to prevent wrinkles, but also to make the wardrobe look more orderly. Especially when choosing clothes, you can see them one by one. The upper and lower body clothes are put together and you can quickly see the effect. The height of the crossbar used for suspension should not be higher than 210 cm, otherwise it would be more laborious for people to take it. If you have a limited height, you can also choose a crossbar that can be raised and lowered. When installing the crossbar, pay attention to the combination of long and short clothes and trousers. For example, the trousers can be installed under the poles of the hanging clothes, and the space utilization is doubled immediately. Note that the length of each crossbar should not exceed 120 cm, otherwise the pole load will be problematic.

Die-cutting Machine

Sichuan Soper Science & Technilogy Co., Ltd , https://www.Soper.com.cn