â–² 47 mode (Enter step: When the main switch is not open, hold the number keys 4 and 7 to open the main switch.) Functions of eye black Mascara,Waterproof Mascara,Eyelash Extension Mascara,Natural Organic Enhance Lash Mascara Suzhou Yimeijia368 Biological Technology Co.,Ltd. , https://www.szymjbeauty.com
1. Development bias adjustment.
(1) Adjust the multimeter to: 1000VDC (Remember, so as not to burn out the multimeter)
(2) Connect the multimeter's COM pen (black pen) to the CN12-1, + meter (red pen) of the main control board (GROND).
(3) Enter the 47 mode (4) Enter the number keys 1 and 2.
(5) Press the Copy key.
(6) Then adjust the main control board VR1 so that the output is -180V.
(7) Press the stop/clear key.
(8) Close the main switch to release the 47 mode.
2. Check the toner density in the developer.
(1) Enter the 47 mode.
(2) Enter the number keys 5 and 0.
(3) Press the Copy key. The copy counter flashes for 90 seconds and the data is displayed on the copy counter.
Then use the following formula to determine the actual percentage of toner content from the data below.
Formula: Toner Density Data = 25-[Data on Copy Counter]
+13=6%;+6=5%;0=4%;-6=3%;-13=2%
(4) Press the stop/clear key.
(5) Close the main gate to release the 47 mode.
3. Toner density adjustment (usually performed when a new developer is replaced).
(1) Replace with new developer.
(2) Enter the 47 mode.
(3) Enter the number keys 5 and 1.
(4) Press the Copy button and M1 (main motor) turns for approximately 3 minutes.
(5) Turn off the main switch to release the 47 mode.
4 light belt adjustment.
(1) The lighted distribution plate is fully opened and the 47 mode is entered.
(2) Enter the number keys 9 and 6.
(3) Press the Copy button (the exposure lamp moves to the center of the glass).
(4) Press the Copy button again (the exposure lamp lights on for 3 seconds).
(5) Put a piece of white paper on the glass plate.
(6) The widths of both ends of the optical tape must be equal; the optical tape must be above the optical slit; adjust the bracket of the exposure lamp's left and right mounting points so that the shiny part is as narrow as possible.
(7) Turn off the main switch to release the 47 mode.
Please follow the following criteria:
1Adjust the lamp contact plate so that the distance between the lamp vacuum point (process point when the exposure lamp is manufactured) and the light distribution plate is 23.4±0.3mm
The vacuum point of the 2 lamps must point to the light distribution plate.
3 Cannot rise when moving the lamp contact plate.
4 Please cut off the power during operation to avoid electric shock.
5.AE adjustment (automatic exposure lamp intensity)
(1) Enter the 47 mode.
(2) Place the AE inspection card on the exposure glass.
(3) Enter the number keys 9 and 8.
(4) Press the Copy key ("98") to start flashing and the scanner is in operation. When the light is on, the adjustment is completed.
(5) Turn off the main switch to release the 47 mode.
1. It has the effect of lengthening eyelashes and enlarging eyes.
2. It can bring curling and supporting force to eyelashes.
3. It can improve the support of eyelashes, and the shape of eyelashes is curved. Especially when we blink and close our eyes, these two layers of eyelashes like small fans can prevent the upper eyeliner from contacting the oil of the lower eyelid and faint, so it is necessary to curl the eyelashes before brushing them.
Misuse of eye black
1. Apply eye black more than 3 times. It is enough to apply eye black twice. If you don't want your eyelashes to form a ball, generally speaking, you can get the best effect by applying it twice.
2. Insert and pull the eyelash brush. It is easy to harden mascara, because air is mixed in the process. Eyelashes are easy to coalesce, and the floating powder is serious.
3. Start applying eye black from the middle of your lashes. When you apply eye black, you must start from the root. eye black is not used for a long time, and it will dissolve when you apply it, so the application method is likely to be wrong. The possibility is as high as 99%. Generally, the curly eye black with larger mascara brush is used.
4. At first, eye black was too thick. Sweep up gently, and then emphasize the wavy feeling when smearing according to personal conditions. Too much mascara at a time is easy to get dirty, because the eyelash state has not been adjusted to the best.