If your salt spray chamber is not heating properly, there are two common heating zones to consider: the saturated chamber and the main cabinet. If neither of them is heating during the test, don’t panic. Follow these steps to troubleshoot the issue: 1. Verify that the power supply is stable and connected properly. A faulty or interrupted power source can prevent the system from operating correctly. 2. Check the water level in both the tank and the saturator. Low water levels can trigger safety mechanisms that shut off the heating function. 3. Inspect the temperature control instruments for both the cabinet and the saturator. Make sure they are functioning and set to the correct temperature. 4. Examine the solid-state relay responsible for heating. A damaged relay may prevent the system from receiving power to the heating elements. 5. Look for any visible damage on the heating tubes inside the salt spray box. Cracked or broken tubes can cause heating failure. 6. Check if the over-temperature alarm light is illuminated. This could indicate a safety shutdown due to excessive heat or a malfunction in the system. 7. Test the temperature sensors using a multimeter or other measuring device. Faulty sensors can send incorrect readings to the control system, leading to improper heating. By following these steps, you can identify and resolve the most common causes of heating failure in a salt spray box. If the problem persists after checking all these points, it may be time to contact a professional technician for further assistance. Bamboo Cotton Makeup Remove Face Cleaning Pad,Bamboo Cotton Makeup Remove Pad,Round Bamboo Cotton Pad,Reusable Pain Remover Pad Fashiontex Industries Ltd , https://www.fashiontexjs.com