Foshan Gruwill Hardware Products Co., Ltd. , https://www.zsgruwill.com
Shanghai Xinzhuang Instrument Intelligent Light Incubator is the most energy efficient
Shanghai Xinzhuang adheres to the philosophy of "survive through quality, develop through technology, benefit from management, and build credibility through service." Every piece of equipment, every project, and every process is handled with care and precision. We strictly follow our commitments and ensure that excellence in both product quality and customer service earns us the trust of our users. With a dedicated technical team behind us, we are here to support you and help you achieve your goals.
**Common Faults and Maintenance Tips for Intelligent Light Incubators:**
1. Ensure the incubator housing is properly grounded to avoid electrical hazards.
2. Place the incubator in a cool, dry, and well-ventilated area, away from direct sunlight and heat sources. Make sure it is placed on a stable surface to prevent noise or vibrations.
3. For optimal heat dissipation, keep at least 100mm of space between the condenser and the wall. There should be a 50mm gap on the sides and at least 300mm above the top of the unit.
4. During transportation, repair, or maintenance, handle the incubator carefully to avoid shocks or tilting. The maximum allowable tilt should not exceed 45 degrees.
5. If the incubator suddenly stops working, check if the fuse (located after the power box) is damaged and verify the power supply connection.
6. When operating in cooling mode, avoid having a temperature difference of more than 25°C between the inside and the ambient environment to maintain efficiency.
**Common Issues with Intelligent Light Incubators:**
1. The compressor may not cool properly, leading to uneven temperatures or frozen air outlets.
2. In balance mode, the compressor runs continuously, which helps maintain better cooling and extends its lifespan.
3. When operating in single-system mode, the temperature may fluctuate significantly when the door is opened or closed, causing the compressor to cycle more frequently.
4. Frequent startups can reduce the unit’s overall lifespan.
5. Uneven temperature distribution might occur due to overloading the incubator or a malfunctioning internal circulation fan.
6. Prolonged use of the light source can cause excessive heat buildup, resulting in temperature inconsistencies inside the chamber.
7. During the defrost cycle, the compressor will stop cooling while the heating element melts frost on the condenser. This process may lead to water accumulation near the air outlet, potentially causing ice formation if not properly managed.
By following these guidelines, you can ensure the smooth operation and longevity of your intelligent light incubator. Let Shanghai Xinzhuang be your reliable partner in maintaining high-performance equipment.