HP-2132 operation details process

<

HP-2132 operation flow hint: Please pay attention to the redo in the red part. To select the object to be measured, the object to be measured must meet the following conditions: 1) The object to be measured must be flat, and the surface cannot be measured; 2) The part to be measured must be a single color, and mixed colors cannot be measured; 3) The diameter of the measured part must be greater than 8mm, and less than 8mm cannot be measured. 4) It is impossible to detect liquid, powder and paste instruments. When the test object meets the above 4 basic conditions then we can start testing

Silicone Rubber Adhesive Tape offer a strong and tough surface for industries which need flexibility, environmental and chemical resistance.

And silicone pressure adhesive is on the back, which ensure the sticky in heat within 260C degree.

The silicone coating is very shiny, has good release and high dielectric strength.

Silicone Tape

Silicone Rubber Adhesive Tape

Silicone Rubber Adhesive Tape, Silicone Adhesive Tape, Silicone Rubber Tape, Silicone Tape, Silicone Coated Adhesive Tape, Silicone Rubber tape with glue

Jiangsu Esone New Material Co,.Ltd , https://www.cookware-manufacturer.com